Diamond Laser 5000 Tile Saw
You must be logged in with an active account to see prices and availability.
Only qualified resellers can register for an account.
- 1/2 HP variable speed motor for more controlled cuts
- Cuts tile, stone and porcelain up to 3/4" thick
- Three-wheel system provides 12" throat to cut large surfaces
- Recirculating water pump with removable water tray keeps saw running clean
- Rugged and portable for transport and on site use
- 1 year warranty (excludes blade) and toll-free tech support
Modern-day fabricators are facing new challenges with increased use of glass mosaics and tile inlay in todays fabrications. The DL5000 helps meet these challenges. The DL5000 cuts through tile, stone, porcelain and glass with ease, speed and comfort - the key is its three-wheel system. The top wheel assembly pivots on a separate bearing with suppressors controlling its motion. By absorbing more vibration, the saw is capable of extremely effective blade-material contact. With the blade tensioning knob directly connected to the top wheel assembly, accurate adjustments can then be made. This portable band saw is a contractor’s best friend.
IF YOU DO NOT HAVE A WHOLESALE ACCOUNT,
YOU MAY ORDER PARTS FOR THIS SAW AT
Max. Horsepower: 1/2 HP
Motor Shaft RPM: 3700
Weight: 45 lbs
Table Size: 15" x 13"
Throat Depth: 12.5"
Blade Length: 61.5"
Max Height for Top Blade Guide: 3"
Blade Thickness: (width of cut) 0.015" (0.38 mm)
Blade Depth: Tile 0.25" (6.0 mm); Glass 0.17" (4.5 mm)
Minimum Radius Cut: 1/4" - 1/2"
Maximum Recommended Cutting Thickness: 3/4" marble/granite and 3/4" glass
Cutting Speed: 3/8" Ceramic Tile 30"/minute; 1/2" Glass tile 30"/minute
Blade Life Estimate: (cutting hours will vary based on material cut and operator experience)
3/8" Ceramic tile 50 - 60 cutting hrs; Glass 40 - 60 cutting hrs.; Porcelain 20 cutting hrs.
Package Dimensions: N/A
Package Weight: 56 lbs
Frequently Bought Together