Diamond Laser 5000 Tile Saw 230v
You must be logged in with an active account to see prices and availability.
Only qualified resellers can register for an account.
- Powerful 1/2 HP variable speed motor
- Cuts glass and stone up to 3/4" thick
- Diamond coated steel blade enables radius cuts as tight as 1/2"
- Three-wheel system provides 12" throat to cut large surfaces
- Durable recirculating water pump system and removable water tray
- 1 year warranty (excludes blade) and toll-free tech support
Modern Day Wet Band Saw
Modern-day fabricators are facing new challenges with increased use of glass mosaics and tile inlay in todays fabrications. The DL5000 helps meet these challenges. The DL5000 cuts through tile, stone, porcelain and glass with ease, speed and comfort - the key is its three-wheel system. The top wheel assembly pivots on a seperate bearing with suppressors controlling its motion. By absorbing more vibration, the saw is capable of extremely effective blade-material contact. With the blade tensioning knob directly connected to the top wheel assembly, accurate adjustments can then be made. This portable band saw is a contactor’s best friend.
230 volt Power Supply Needed
IF YOU DO NOT HAVE A WHOLESALE ACCOUNT,
YOU MAY ORDER PARTS FOR THIS SAW AT
Max. Horsepower: 1/2 HP
Motor Shaft RPM: 3700
Weight: 45 lbs
Table Size: 15" x 13"
Throat Depth: 12.5"
Blade Length: 61.5"
Max Height for Top Blade Guide: 3"
Blade Thickness: (width of cut) 0.015" (0.38 mm)
Blade Depth: Tile 0.25" (6.0 mm); Glass 0.17" (4.5 mm)
Minimum Radius Cut: 1/4" - 1/2"
Maximum Recommended Cutting Thickness: 3/4" marble/granite and 3/4" glass
Cutting Speed: 3/8" Ceramic Tile 30"/minute; 1/2" Glass tile 30"/minute
Blade Life Estimate: (cutting hours will vary based on material cut and operator experience)
3/8" Ceramic tile 50 - 60 cutting hrs; Glass 40 - 60 cutting hrs.; Porcelain 20 cutting hrs.
Package Dimensions: N/A
Weight: 56 lbs