Wildberry Mosaic Candle Shelters

Item #: PROJECT0335

You must be logged in with an active account to see prices and availability.

Only qualified resellers can register for an account.

Features

• Generation Green™ (g2)

Jennifer’s Mosaics™


Description

SKILL LEVEL: 2 (1 being the easiest, 5 being most difficult)
TIME TO COMPLETE: 2 hours
 →PROJECT TIP
• Always, wear safety goggles when using glass-crafting tools. Everyday eyeglasses have only impact resistant lenses.
• To ensure top performance keep your bottle cutter blade oiled.
 
MATERIALS CHECKLIST  

• Generation Green™ (g2)
• One 7.50ML green bottle
• One cork
• One amber colored bottle or amber cathedral chips
• 1 pkg Jennifer’s Mosaics™ Cathedral Glass Chips
• 1 pkg of Deco Glass Gems – Small • Glass Adhesive
• 4.3 clay plant saucer (found  
in any garden center)
• Eyelet Screw
• Wildberry pattern
• Rubber Bumper Pads (Used for Cabinets and Drawers)

INSTRUCTIONS
 Read and carefully following the instructions contained within the Generation Green™ (g2) bottle cutter manual.
 
1. Cover the work area with craft or newspaper.
2. Measure 11” down from the top of the bottle and mark with a Sharpie®. 3. Using the bottle cutter, score and separate where indicated. 4. Smooth the rough edges as instructed in the bottle cutter manual. 5. Clean your bottle inside and out with a window cleaner or for a more natural cleaner use a mixture of 1 cup of water to 2 tablespoons of vinegar. Dry glass surface. →MOSAIC TIP: When working on a rounded surface it is a good idea to rest your item on an old hand towel or a Ziplock® bag filled with rice. This will keep it from rolling around and make it easier to mosaic.
6. Tape the pattern inside the bottle with the image facing out (FIG. 1).
7. Using a wheeled glass nipper, nip amber colored bottle into 1/8” wide rectangles of varying lengths or nip amber colored cathedral glass in the same fashion (FIG. 2).
8. Glue into place where branches are indicated on the pattern and allow glue to set.
9. For leaves, place the green cathedral glass square over the leaf pattern and trace around it onto the glass with a Sharpie® (FIG. 3).
10. Using a wheeled glass nipper, nip away at the glass until you reach the outline of the leaf. 11. You may choose to glue the whole leaf on the surface of your bottle or, further nip them into halves and quarters for a more mosaic-look.

Reviews

No reviews have been written for this product.